# Aero ↔ Optical Shows an APS's two size measurements against each other: for a chosen moment, how much of the aerosol sat in each combination of **optical** and **aerodynamic** diameter. The relationship between the two is a property of the particles — their shape and density — so this view says something about *what* you measured, not just how much. ```{figure} ../_static/gui/tab-aero-optical.png :alt: The Aero ↔ Optical tab with a total-concentration trace above and a 3-D bar plot of the correlated optical and aerodynamic distribution below :width: 100% The time cursor (red) parked on a peak, and the correlated optical × aerodynamic distribution at that instant below. ``` **Available for:** a **correlated APS** only — an {class}`~aerosoltools.Aerosol3d` that carries both size axes. Every other dataset, including an APS without the correlated output, has no such tab. If you only need one of the two axes, the [Metadata](metadata.md) tab's **Show axis (APS)** setting picks which one the ordinary 2D tabs ([heatmap](heatmap.md), [PM bands](pm-bands.md), [PSD](psd.md)) work on. ## The two panels The **top panel** is total concentration over time, carrying a red **time cursor**. Drag it to choose the moment shown below; the timestamp is printed above the lower panel. The **bottom panel** is a 3-D bar plot of the correlated distribution at that moment. One bar per (optical, aerodynamic) size-bin pair, with both its **height and its colour** showing concentration — so it reads like a surface while keeping the unequally sized bins visibly separate. The colour scale is **fixed to the dataset's global range**, not rescaled per timestamp. That is deliberate: it means dragging the cursor through time gives a fair comparison, and a bar that grows really is growing. ## Reading it Bars along the diagonal are particles whose optical and aerodynamic diameters agree — roughly spherical, with a density near the calibration assumption. Bars off the diagonal are the interesting ones: an aerodynamic diameter well above the optical one points to dense particles, and the reverse suggests low-density or irregular, chain-like agglomerates. ## Normalize (dlogDp) Divides each cell by **both** log bin widths — dN/(dlogDp_optical · dlogDp_aerodynamic) — so bins of unequal width are comparable. Without it, a wide bin looks more concentrated simply because it spans more diameters. The top total-concentration panel always stays on the raw counts. ## Under the hood A correlated APS loads as {class}`~aerosoltools.Aerosol3d`, which holds both distributions and can hand out either axis as an ordinary 2D object: ```python import aerosoltools as at data = at.load_aps_file("Sample_APS_correlated.txt") data.is_correlated # True for this file aero = data.axis_view("aerodynamic") # the Show axis (APS) setting opt = data.axis_view("optical") ``` See [13 — APS](../examples/13-aps.ipynb).